BoxTemplate

Cone Template

A full cone or a truncated one. Party hats, cone bags, megaphones, tapered pots — set the top diameter to zero for a point.

Cone — change shape

Size mm
Only here Your own design

Put a logo, photo or pattern straight onto the box — most free template sites give you the outline and stop there. Drag it where you want it; it is trimmed to the cut lines so nothing prints off the card, and it stays in your browser.

Advanced settingsunits, flaps, board, paper, lines
Units
Shape settings
Page

Bigger than the paper? Each piece prints whole on its own sheet. A single piece is never split: pick bigger paper or a smaller size. More about printing

Template

cutfold

Drop a picture anywhere on the drawingTap “Add a picture” below to print your own design on this box.

Print at 100% (“actual size”), never “fit to page”, or the box comes out the wrong size.

The cone template, flat and folded

Cone template — free printable dieline with cut and fold lines, any size
The printable dieline at its standard size: 162 × 298 mm flat.
Cone folded up from the template — the finished box
The finished cone, 120 × 0 × 150 mm.

What this template is for

A full cone or a truncated one. Party hats, cone bags, megaphones, tapered pots — set the top diameter to zero for a point.

Also called truncated cone · party hat template · cone bag · tapered tube

What size cone do I need?

The same cone does a different job at each size. These are starting sizes for the things people make it for most. Tap one to open the template at that size, then measure your own and change any number to fit.

UseSize (Bottom diameter × Top diameter (0 = point) × Height)Holds
Party hatBottom diameter 170 mm · top diameter (0 = point) 0 mm · height 200 mmA child’s or adult’s head, with elastic
Sweet or popcorn coneBottom diameter 80 mm · top diameter (0 = point) 0 mm · height 150 mmA handful of sweets or popcorn
Table Christmas treeBottom diameter 150 mm · top diameter (0 = point) 0 mm · height 250 mmA small tree to decorate
Plant pot cover100 × 80 × 100 mmA 7–8 cm plant pot

The cone at a glance

Standard sizeBottom diameter × Top diameter × Height: 120 × 0 × 150 mm (4.7 × 0 × 5.9 in)
Flat sheet at that size162 × 298 mm (6.4 × 11.7 in)
Prints onA4: too big at this size · US Letter: too big at this size · A3: one sheet
Biggest on one sheet of A4115 × 0 × 144 mm (4.5 × 0 × 5.7 in)
Biggest on one sheet of US Letter108 × 0 × 136 mm (4.3 × 0 × 5.4 in)
GlueYes
Drawn forHeavy cardstock, 350–450 gsm / cereal-box card (0.5 mm)

Making cones: hats, bags and pots

A party hat that fits

Measure round the head where the hat will sit, divide by 3.14 and type that as the bottom diameter, with the top diameter at 0 for a point. A head of 56 cm gives about 178 mm. A height of 150 to 180 mm looks right for most party hats. Punch a hole each side near the rim for elastic.

Cone bags for sweets and popcorn

For a hand-held cone bag, set the bottom diameter (the open end) to 80 to 100 mm and the height to 180 to 220 mm: that holds a good handful. Line it with greaseproof paper for anything sticky; ordinary craft card is not made for direct food contact.

Truncated cones

Give the top diameter a value and the point is cut off: a tapered tube for a plant pot cover, a lamp shade, a megaphone or a cake-pop stand. The top is always the narrower end; for a cup or planter that flares out, make the cone and stand it on its narrow end.

Which paper

  • Party hats: 160–220 gsm card rolls without creasing.
  • Cone bags: 120–160 gsm paper or kraft.
  • Pots and stands: 250–300 gsm card; curl it over a table edge first so it rolls evenly.

Mistakes to avoid

  • Gluing the seam flat on a table. Roll the cone first, then glue the tab while the cone is round, holding it from the inside with a pencil.
  • Measuring round the head and typing that as the diameter. The diameter is the distance round divided by 3.14; a 56 cm head typed as 560 mm gives a hat more than three times too big.
  • Using glossy card with a glue stick. It does not hold on a gloss finish; use double-sided tape or white PVA.

Printing it

At its standard size the cone is too big for A4 or US Letter: print it on one sheet of A3, or make it smaller. Whatever the size, print at 100% (“actual size”), never “fit to page”. Printing it right · Cricut and Silhouette · Designing it in Canva · Your own picture on it

How to put it together

Drawn from the cone template itself; words in capitals are printed on it.

  1. Cut the solid lines

    Solid lines are cuts: inside shapes first.

  2. Score every dashed line

    Dashed lines are folds: score them first so the card does not crack.

  3. CONE(glue)

    Step by step

    1. Cut out the CONE.
    2. Curl it over a table edge first so it rolls evenly.
    3. Roll it up and glue the (glue) flap under the far straight edge.

Glue: glue stick on paper, PVA on card.

Tip for this one: Roll it up and glue the straight edge. Curl the paper over a table edge first and it will roll far more evenly.

Questions about the cone

How do I make a party hat?

Set the top diameter to zero for a point, the bottom diameter to the head size divided by pi (roughly the head circumference ÷ 3.14) and the height to how tall you want it.

Why does it say my cone is too wide?

A cone that is very wide and very short needs more than a full circle of paper, which cannot be cut from one flat sheet. Raise the height or reduce the bottom diameter.

What is a truncated cone?

One with the point cut off, which gives a tapered tube — a plant pot or a lampshade shape. Set a top diameter above zero.

What size cone do I need for party hat, sweet or popcorn cone or table christmas tree?

Party hat: Bottom diameter 170 mm · top diameter (0 = point) 0 mm · height 200 mm; Sweet or popcorn cone: Bottom diameter 80 mm · top diameter (0 = point) 0 mm · height 150 mm; Table Christmas tree: Bottom diameter 150 mm · top diameter (0 = point) 0 mm · height 250 mm; Plant pot cover: 100 × 80 × 100 mm. These are starting sizes; measure what goes inside and add a few millimetres of room.

Templates like this one

In these collections: Wedding and party favour box templates · Christmas box templates

Guides: Halloween treat boxes you can print and fold tonight · Paper 3D shapes for the classroom: nets, puzzles and a flexagon

See all 174 templates · For Canva · For Cricut · For Etsy sellers · Getting it printed

Collections: Wedding and party favour box templates · Christmas box templates · Food box templates · Diwali mithai box templates