Shallow Box Template
Tuck-top box with dust flaps and a thumb hole. Best when the height is small next to the length and width — pizza, tart, gift and card boxes.
Shallow box — change shape
Put a logo, photo or pattern straight onto the box — most free template sites give you the outline and stop there. Drag it where you want it; it is trimmed to the cut lines so nothing prints off the card, and it stays in your browser.
Advanced settingsunits, flaps, board, paper, lines
Bigger than the paper? Each piece prints whole on its own sheet. A single piece is never split: pick bigger paper or a smaller size. More about printing
This shape has no 3D view yet. The template is still exact.
This shape's 3D view is only an approximation of the printed sheet, so it shows plain card. Your pictures still print exactly where you placed them on the template.
Drag to turn and tilt it; ctrl + scroll or the + and − buttons zoom.Swipe sideways to turn it. Two fingers tilt and pinch to zoom; full screen lets one finger do everything. Double-tap to reset. The fold starts from the very template you print, so gaps and loose tabs show.
Drop a picture anywhere on the drawingTap “Add a picture” below to print your own design on this box.
Print at 100% (“actual size”), never “fit to page”, or the box comes out the wrong size.
The shallow box template, flat and folded


What this template is for
Tuck-top box with dust flaps and a thumb hole. Best when the height is small next to the length and width — pizza, tart, gift and card boxes.
Also called tuck-top box · one-piece folding box · pizza-style box · flat gift box · hinged lid box · flip lid gift box
What size shallow box do I need?
The same shallow box does a different job at each size. These are starting sizes for the things people make it for most. Tap one to open the template at that size, then measure your own and change any number to fit.
| Use | Size (Length × Width × Height) | Holds |
|---|---|---|
| 8 in pizza | 210 × 210 × 40 mm | An 8 in (20 cm) pizza |
| 12 in pizza | 310 × 310 × 45 mm | A 12 in (30 cm) pizza |
| Tart or cake slice tray | 200 × 200 × 50 mm | A 7 in (18 cm) tart or a few slices |
| Cookies and brownies | 200 × 130 × 35 mm | Six cookies or brownies in a single layer |
| Photo prints | 6½ × 4½ × 1 in (165 × 114 × 25 mm) | A stack of 4 × 6 in photos |
| Necklace or jewellery | 100 × 100 × 25 mm | A necklace, bracelet or watch laid flat |
The shallow box at a glance
| Standard size | Length × Width × Height: 115 × 90 × 20 mm (4.5 × 3.5 × 0.8 in) |
|---|---|
| Flat sheet at that size | 195 × 235 mm (7.7 × 9.3 in) |
| Prints on | A4: one sheet · US Letter: one sheet · A3: one sheet |
| Biggest on one sheet of A4 | 120 × 94 × 20 mm (4.7 × 3.7 × 0.8 in) |
| Biggest on one sheet of US Letter | 123 × 97 × 21 mm (4.8 × 3.8 × 0.8 in) |
| Glue | Yes |
| Drawn for | Heavy cardstock, 350–450 gsm / cereal-box card (0.5 mm) |
Making a good shallow box
What shallow means here
This template suits boxes much lower than they are long or wide: a box for a pizza slice, a tart, a pair of earrings on a card, a set of postcards or a bar of soap. For a tall box with the same tuck lid, the gift box (straight tuck) is laid out better.
Sizes people make it in
- Greeting card box: about 160 × 115 mm and 20–30 mm high, for an A6 card with room to spare.
- Postcard or print set: about 155 × 110 mm and 25 mm high for 10 × 15 cm prints.
- Soap bar: measure the bar and add 2–3 mm each way; most bars need 15–30 mm height.
- Single cake or tart slice: about 120 × 120 mm and 60 mm high; above that, a taller box is better.
Which card
For small gift boxes, 250–300 gsm card folds cleanly and holds the tuck. For anything heavier, such as food or a stack of prints, use 350 gsm or thin board, and type its thickness into Material thickness so the tuck flap and slits are made to fit it.
The thumb hole and the window
The thumb hole is the half circle in the front wall that lets you get a fingertip under the lid. Set it to zero for a cleaner front. A window border cuts an opening in the lid; tape acetate behind it on the inside before you fold, so the thin frame does not tear.
Mistakes to avoid
- Skipping the scoring. Shallow walls are short, and an unscored fold on short walls pulls the corners out of square.
- Gluing the dust flaps. They only fold in under the lid; glue goes on the four glue flaps, inside the side walls.
- Making the tuck flap too small for heavy card. Raise it a few millimetres and the lid stays shut.
Printing it
At its standard size the shallow box prints on one sheet of A4 or US Letter. Whatever the size, print at 100% (“actual size”), never “fit to page”. Printing it right · Cricut and Silhouette · Designing it in Canva · Your own picture on it
How to put it together
Drawn from the shallow box template itself; words in capitals are printed on it.
-
Cut the solid lines
Solid lines are cuts: inside shapes first.
-
Score every dashed line
Dashed lines are folds: score them first so the card does not crack.
-
Step by step
- Cut the outline and the thumb hole in the FRONT. If you set a window border, cut the opening in the TOP now and tape acetate over it on the inside.
- Fold the FRONT, BACK, LEFT and RIGHT walls up from the BOTTOM.
- The FRONT and BACK carry the four (glue) flaps: fold each one in and glue it to the inside of the LEFT or RIGHT wall next to it. Hold each corner square until it grips.
- Fill the box, then fold the (dust) flaps on top of the LEFT and RIGHT walls in.
- Close the TOP over the box and push the (tuck) flap down inside the FRONT wall.
Glue: glue stick on paper, PVA on card.
Tip for this one: Score every dashed line. Fold the four glue flaps in, glue them to the inside of the side walls, fold the dust flaps in, then close the lid and push the tuck flap inside the front wall. If you set a window border, cut the opening out before you fold anything, and tape a piece of acetate or cellophane over it on the inside — the frame is thin, and it tears far more easily once the box has been creased.
Questions about the shallow box
What is a shallow box?
A box whose height is small compared with its length and width. This template is laid out to waste as little board as possible at those proportions, which is why pizza and tart boxes use it.
What is the thumb hole for?
It is the half-circle cut in the top edge of the front wall. It lets you get a finger under the lid to open the box once the tuck flap is pushed in. Set the diameter to zero if you do not want one.
What thickness should I use?
Measure your board with a ruler or callipers. Ordinary printer paper is about 0.1 mm, thin card 0.3 mm, cereal-box card around 0.5 mm and corrugated board 3 mm or more. The tuck flap and slits are adjusted from this figure.
Do I need glue?
Only on the four glue flaps at the corners. The lid closes with a tuck flap, so once the walls are glued the box opens and shuts as often as you like without tape.
Will it fit on A4 or US Letter?
If it does not, the box maker says so before you print and offers bigger paper or a box shrunk to fit. A piece is never split across two sheets, so whatever prints will fold.
What size shallow box do I need for 8 in pizza, 12 in pizza or tart or cake slice tray?
8 in pizza: 210 × 210 × 40 mm; 12 in pizza: 310 × 310 × 45 mm; Tart or cake slice tray: 200 × 200 × 50 mm; Cookies and brownies: 200 × 130 × 35 mm; Photo prints: 6½ × 4½ × 1 in (165 × 114 × 25 mm); Necklace or jewellery: 100 × 100 × 25 mm. These are starting sizes; measure what goes inside and add a few millimetres of room.
Templates like this one
In these collections: Food box templates · Diwali mithai box templates
Guides: How to make a mailer box for shipping · Why a box template prints the wrong size, and how to fix it · How to measure a product for a custom box · How to put your logo or artwork on a box template
See all 174 templates · For Canva · For Cricut · For Etsy sellers · Getting it printed
Collections: Wedding and party favour box templates · Christmas box templates · Food box templates · Diwali mithai box templates