Pillow Box Template
The curved-end pillow box. No glue at the ends at all — the curves lock into each other.
Pillow pack — change shape
Put a logo, photo or pattern straight onto the box — most free template sites give you the outline and stop there. Drag it where you want it; it is trimmed to the cut lines so nothing prints off the card, and it stays in your browser.
Advanced settingsunits, flaps, board, paper, lines
Bigger than the paper? Each piece prints whole on its own sheet. A single piece is never split: pick bigger paper or a smaller size. More about printing
This shape has no 3D view yet. The template is still exact.
This shape's 3D view is only an approximation of the printed sheet, so it shows plain card. Your pictures still print exactly where you placed them on the template.
Drag to turn and tilt it; ctrl + scroll or the + and − buttons zoom.Swipe sideways to turn it. Two fingers tilt and pinch to zoom; full screen lets one finger do everything. Double-tap to reset. The fold starts from the very template you print, so gaps and loose tabs show.
Drop a picture anywhere on the drawingTap “Add a picture” below to print your own design on this box.
Print at 100% (“actual size”), never “fit to page”, or the box comes out the wrong size.
The pillow pack template, flat and folded


What this template is for
The curved-end pillow box. No glue at the ends at all — the curves lock into each other.
Also called pillow box · curved-end box · pillow pouch
What size pillow pack do I need?
The same pillow pack does a different job at each size. These are starting sizes for the things people make it for most. Tap one to open the template at that size, then measure your own and change any number to fit.
| Use | Size (Length × Width) | Holds |
|---|---|---|
| Gift card | 100 × 70 mm | A gift or bank card, 86 × 54 mm |
| Earrings or bracelet | 120 × 80 mm | Earrings on a card, a bracelet or a hair clip |
| Wedding favour | 150 × 100 mm | A handful of sweets, almonds or a small soap |
The pillow pack at a glance
| Standard size | Length × Width × End curve depth: 120 × 80 × 18 mm (4.7 × 3.1 × 0.7 in) |
|---|---|
| Flat sheet at that size | 176 × 156 mm (6.9 × 6.1 in) |
| Prints on | A4: one sheet · US Letter: one sheet · A3: one sheet |
| Biggest on one sheet of A4 | 154 × 103 × 23 mm (6.1 × 4.1 × 0.9 in) |
| Biggest on one sheet of US Letter | 159 × 106 × 23 mm (6.3 × 4.2 × 0.9 in) |
| Glue | Yes |
| Drawn for | Heavy cardstock, 350–450 gsm / cereal-box card (0.5 mm) |
Printing it
At its standard size the pillow pack prints on one sheet of A4 or US Letter. Whatever the size, print at 100% (“actual size”), never “fit to page”. Printing it right · Cricut and Silhouette · Designing it in Canva · Your own picture on it
How to put it together
Drawn from the pillow pack template itself; words in capitals are printed on it.
-
Cut the solid lines
Solid lines are cuts: inside shapes first.
-
Score every dashed line
Dashed lines are folds: score them first so the card does not crack.
-
Step by step
- Cut the outline. Score the curved end lines gently, following the curve.
- Fold the FRONT over onto the BACK and glue the (glue) flap along the side seam. Let it dry.
- Push in one pair of curved ends so they spring into shape.
- Fill it, then push in the other pair to close it.
Glue: glue stick on paper, PVA on card.
Tip for this one: Glue the side seam, let it dry, then push both curved ends inwards. They will spring into the pillow shape.
Questions about the pillow pack
How does a pillow box close?
Glue only the side seam. Once dry, push both curved ends inwards and they spring into the pillow shape and hold each other shut.
What does the end curve depth change?
How deep the curved ends are, which sets how fat the finished pillow is. About a fifth of the width is a good starting point.
What card works best?
Thin card, around 250 to 300 gsm. Board that is too thick will not curve, and paper that is too thin will not hold the shape.
What size pillow pack do I need for gift card, earrings or bracelet or wedding favour?
Gift card: 100 × 70 mm; Earrings or bracelet: 120 × 80 mm; Wedding favour: 150 × 100 mm. These are starting sizes; measure what goes inside and add a few millimetres of room.
Templates like this one
In these collections: Wedding and party favour box templates · Diwali mithai box templates
Guides: How to make a box from a cereal box (and other card you already have) · Halloween treat boxes you can print and fold tonight · How to make 50 or 100 identical boxes without losing a weekend · Boxes without glue
See all 174 templates · For Canva · For Cricut · For Etsy sellers · Getting it printed
Collections: Wedding and party favour box templates · Christmas box templates · Food box templates · Diwali mithai box templates