No sign-up, no watermark on your box
Nothing uploaded — it runs in your browser
Free for personal use
PDF · SVG · DXF · PNG 300 dpi
BoxTemplate

Earring Display Card Template

The card earrings are sold on: square or rounded corners, a hang hole or euro slot for a shop hook, and evenly spaced pairs of holes for studs and hooks. Etsy and craft-fair jewellery, markets and gift shops.

Earring display card — change shape

Size mm
Only here Your own design

Put a logo, photo or pattern straight onto the box — most free template sites give you the outline and stop there. Drag it where you want it; it is trimmed to the cut lines so nothing prints off the card, and it stays in your browser.

Advanced settingsunits, flaps, board, paper, lines
Units
Shape settings
Page

Bigger than the paper? Each piece prints whole on its own sheet. A single piece is never split: pick bigger paper or a smaller size. More about printing

Template

cutfold

Drop a picture anywhere on the drawingTap “Add a picture” below to print your own design on this box.

Print at 100% (“actual size”), never “fit to page”, or the box comes out the wrong size.

The earring display card template, flat and folded

Earring display card template — free printable dieline with cut and fold lines, any size
The printable dieline at its standard size. Type your own size above for yours.
Earring display card folded up from the template — the finished piece
The finished earring display card, made from it.

What this template is for

The card earrings are sold on: square or rounded corners, a hang hole or euro slot for a shop hook, and evenly spaced pairs of holes for studs and hooks. Etsy and craft-fair jewellery, markets and gift shops.

Also called earring card template · earring display card · jewelry display card · earring backing card — all the same shape, and this is it.

How to use this template

All four downloads are the same earring display card at the same size — only the format changes.

PDF printing at home
Print at 100 per cent, or hand it to a print shop as "actual size, no scaling".
PNG 300 dpi Canva, Photoshop, Procreate
Upload, lock it in place and design your earring display card on top. Free plan and phone included. Full Canva walkthrough →
SVG Cricut, Illustrator, Inkscape, Affinity
Vector, with cuts, folds and labels on separate layers. Cricut and Silhouette walkthrough →
DXF Silhouette, laser and vinyl cutters
Two layers, CUT and FOLD — and the one free Silhouette Studio Basic will open.

Getting it printed properly →

Printing it

  1. Type your size above, then download the PDF.
  2. Print at 100% — never “fit to page”, or every measurement comes out wrong.
  3. Too big for the paper? Pick your paper size and leave Fit the pieces to the page ticked: each piece gets its own place on a sheet and the PDF comes out with every page in it, nothing cut in half and nothing to tape.

How to put it together

These pictures are the earring display card itself, not a generic diagram — change the measurements above and the template changes, but the three steps never do.

  1. Cut the solid lines

    Every solid line is a cut. Do the inside shapes first, while the sheet is still whole and easy to hold.

  2. Try the first one

    There is nothing to fold. Before you cut a stack, try the first one on what it is for and change the size above if it needs it.

  3. CARD 1CARD 2CARD 3CARD 4CARD 5CARD 6CARD 7CARD 8CARD 9

    Finish it

    Print your brand on the card first, then cut out the cards and the hang holes. Pierce the small earring holes with a pin or an awl rather than cutting them. Push each stud through its hole and fit the back behind; hang hooks through from the front.

No glue needed.

Questions about the earring display card

What size are the cards?
The default card is 50 × 70 mm with square corners (set a corner radius to round them), two pairs of earrings 20 mm apart and a euro slot at the top, and nine fit on one A4 or US Letter sheet. Set the width, height and number of pairs to suit your earrings; the pairs are spread evenly down the card, at least 12 mm apart.
What is a euro slot?
The standard hang hole on shop packaging: a 25 mm slot 5 mm tall with a round rise in the middle, so the card hangs straight from any peg-board or slatwall hook. Choose a round hole instead for a ribbon or a single pin, or none for a card that stands in a box. On cards narrower than 37 mm the slot is narrowed to keep 6 mm of card at each side.
How do I make the small earring holes?
The holes are drawn 1.5 mm across, the size of a stud post. A cutting machine cuts them cleanly; by hand, pierce each one with a pin or an awl on a cutting mat rather than cutting it. Use card of 300 gsm or more so heavy earrings do not tear through.

Print your own design on it

Add a logo, photo or pattern in the panel on the left and drag it onto the earring display card. It is trimmed to the cut outline, embedded properly in the PDF, and never leaves your computer — most free template sites hand you the outline and stop there. How printing your own design works.

Templates like this one

See all 132 templates · For Canva · For Cricut · For Etsy sellers · Getting it printed

Collections: Wedding and party favour box templates · Christmas box templates · Food box templates · Diwali mithai box templates