Box With Lid Template
Two nesting trays — a base and a slightly larger lid that slides over it. The classic gift and shirt box.
Box with lid — change shape
Put a logo, photo or pattern straight onto the box — most free template sites give you the outline and stop there. Drag it where you want it; it is trimmed to the cut lines so nothing prints off the card, and it stays in your browser.
Advanced settingsunits, flaps, board, paper, lines
Bigger than the paper? Each piece prints whole on its own sheet. A single piece is never split: pick bigger paper or a smaller size. More about printing
This shape has no 3D view yet. The template is still exact.
This shape's 3D view is only an approximation of the printed sheet, so it shows plain card. Your pictures still print exactly where you placed them on the template.
Drag to turn and tilt it; ctrl + scroll or the + and − buttons zoom.Swipe sideways to turn it. Two fingers tilt and pinch to zoom; full screen lets one finger do everything. Double-tap to reset. The fold starts from the very template you print, so gaps and loose tabs show.
Drop a picture anywhere on the drawingTap “Add a picture” below to print your own design on this box.
Print at 100% (“actual size”), never “fit to page”, or the box comes out the wrong size.
The box with lid template, flat and folded


What this template is for
Two nesting trays — a base and a slightly larger lid that slides over it. The classic gift and shirt box.
Also called two-piece box · base and lid box · lift-off lid box · shirt box
What size box with lid do I need?
The same box with lid does a different job at each size. These are starting sizes for the things people make it for most. Tap one to open the template at that size, then measure your own and change any number to fit.
| Use | Size (Length × Width × Height) | Holds |
|---|---|---|
| Ring or earrings | 60 × 60 × 35 mm | A ring, earrings or a small pendant on a cushion |
| Mithai 250 g | 5 × 4 × 1½ in (127 × 102 × 38 mm) | About 250 g of barfi, kaju katli or laddoos |
| Mithai 500 g | 7 × 5 × 1½ in (178 × 127 × 38 mm) | About 500 g of sweets in one layer |
| Mithai 1 kg | 210 × 150 × 42 mm | About 1 kg of sweets, the usual Diwali box |
| Shoes | 330 × 200 × 120 mm | A pair of adult shoes up to about UK 10 / US 11 |
| Folded shirt or saree | 380 × 280 × 60 mm | A folded shirt, kurta or saree |
The box with lid at a glance
| Standard size | Length × Width × Height: 150 × 100 × 40 mm (5.9 × 3.9 × 1.6 in) |
|---|---|
| Flat sheet at that size | 230 × 334 mm (9.1 × 13.1 in) |
| Prints on | A4: 2 sheets, each piece whole · US Letter: 2 sheets, each piece whole · A3: one sheet |
| Biggest on one sheet of A4 | 125 × 83 × 33 mm (4.9 × 3.3 × 1.3 in) |
| Biggest on one sheet of US Letter | 116 × 77 × 30 mm (4.6 × 3 × 1.2 in) |
| Glue | Yes |
| Drawn for | Heavy cardstock, 350–450 gsm / cereal-box card (0.5 mm) |
Printing it
At its standard size the box with lid prints on 2 sheets of A4 or US Letter, each piece whole on its sheet, so there is nothing to tape. Whatever the size, print at 100% (“actual size”), never “fit to page”. Printing it right · Cricut and Silhouette · Designing it in Canva · Your own picture on it
How to put it together
Drawn from the box with lid template itself; words in capitals are printed on it.
-
Cut the solid lines
Solid lines are cuts: inside shapes first.
-
Score every dashed line
Dashed lines are folds: score them first so the card does not crack.
-
Step by step
- Cut out both pieces: the BASE tray and the larger LID tray. If you set a window border, cut the opening in the LID and tape acetate behind it.
- Base: fold the two SIDE walls and two END walls up and glue each corner tab inside the END wall next to it.
- Lid: fold its walls down and glue its corner tabs the same way.
- Let both dry, then put the lid on. It is already sized one card thickness plus your clearance bigger, so it slides over the base.
Glue: glue stick on paper, PVA on card.
Tip for this one: Build both trays the same way. The lid is already enlarged by the material thickness plus the clearance you set. If you set a window border, cut the opening out before you fold anything, and tape a piece of acetate or cellophane over it on the inside — the frame is thin, and it tears far more easily once the box has been creased.
Questions about the box with lid
How much bigger is the lid?
The lid is enlarged by twice the material thickness plus the clearance you set, so it slides on without forcing. Raise the clearance a little for thick or textured board.
Why is the lid a separate piece?
A two-piece box is stronger and looks tidier than a hinged one, and both parts print flat. If you want a hinged lid, use the shallow box instead.
My lid is too tight. What do I change?
Increase the lid clearance by half a millimetre at a time. Check that the material thickness you entered matches your actual board.
What size box with lid do I need for ring or earrings, mithai 250 g or mithai 500 g?
Ring or earrings: 60 × 60 × 35 mm; Mithai 250 g: 5 × 4 × 1½ in (127 × 102 × 38 mm); Mithai 500 g: 7 × 5 × 1½ in (178 × 127 × 38 mm); Mithai 1 kg: 210 × 150 × 42 mm; Shoes: 330 × 200 × 120 mm; Folded shirt or saree: 380 × 280 × 60 mm. These are starting sizes; measure what goes inside and add a few millimetres of room.
Templates like this one
In these collections: Diwali mithai box templates
Guides: Box lid too tight or too loose? How to get one that fits · How to make a box from a cereal box (and other card you already have) · Christmas paper crafts: gift boxes, stars and decorations to print and fold · Boxes without glue
See all 174 templates · For Canva · For Cricut · For Etsy sellers · Getting it printed
Collections: Wedding and party favour box templates · Christmas box templates · Food box templates · Diwali mithai box templates