Star Shaped Box Template
A star-shaped box with any number of points. Christmas decorations, party favours, award and gift boxes.
Star box — change shape
Put a logo, photo or pattern straight onto the box — most free template sites give you the outline and stop there. Drag it where you want it; it is trimmed to the cut lines so nothing prints off the card, and it stays in your browser.
Advanced settingsunits, flaps, board, paper, lines
Bigger than the paper? Each piece prints whole on its own sheet. A single piece is never split: pick bigger paper or a smaller size. More about printing
This shape has no 3D view yet. The template is still exact.
This shape's 3D view is only an approximation of the printed sheet, so it shows plain card. Your pictures still print exactly where you placed them on the template.
Drag to turn and tilt it; ctrl + scroll or the + and − buttons zoom.Swipe sideways to turn it. Two fingers tilt and pinch to zoom; full screen lets one finger do everything. Double-tap to reset. The fold starts from the very template you print, so gaps and loose tabs show.
Drop a picture anywhere on the drawingTap “Add a picture” below to print your own design on this box.
Print at 100% (“actual size”), never “fit to page”, or the box comes out the wrong size.
The star box template, flat and folded
What this template is for
A star-shaped box with any number of points. Christmas decorations, party favours, award and gift boxes.
Also called star-shaped box · star gift box · christmas star box
What size star box do I need?
The same star box does a different job at each size. These are starting sizes for the things people make it for most. Tap one to open the template at that size, then measure your own and change any number to fit.
| Use | Size | Holds |
|---|---|---|
| Favour star | Number of points 5 · diameter across points 100 mm · height of the box 30 mm | A few sweets for each guest |
| Christmas star box | Number of points 5 · diameter across points 150 mm · height of the box 35 mm | Chocolates or a small gift under the tree |
| Six-point gift star | Number of points 6 · diameter across points 220 mm · height of the box 60 mm | A bigger gift or cookies |
The star box at a glance
| Standard size | Diameter across points × Height of the box: 150 × 35 mm (5.9 × 1.4 in) |
|---|---|
| Number of points | 5 |
| Flat sheet at that size | 531 × 384 mm (20.9 × 15.1 in) |
| Prints on | A4: 3 sheets, each piece whole · US Letter: 3 sheets, each piece whole · A3: 2 sheets, each piece whole |
| Biggest on one sheet of A4 | 59 × 13 mm (2.3 × 0.5 in) |
| Biggest on one sheet of US Letter | 61 × 14 mm (2.4 × 0.6 in) |
| Glue | None needed |
| Drawn for | Heavy cardstock, 350–450 gsm / cereal-box card (0.5 mm) |
Making star boxes for Christmas and parties
Choosing the star
Five points is the classic Christmas star; six reads as a snowflake or a Star of David, and eight or more starts to look like a flower or a sun. The tool takes three to twelve. Point sharpness sets how far in the notches cut between the points: low numbers give long thin spikes, high numbers a fat, chunky star that holds more inside.
The diameter is measured across the points. A 150 mm star, as it opens, holds a few chocolates or a small ornament; 80 to 100 mm suits a single truffle or a ring.
Which card
Use 250–300 gsm card. The wall has a crease at every point and every notch, so a five-point star has ten folds round its edge, and they alternate: points fold one way, notches the other. Score every one before you start; the crisper they are, the sharper the star. Type the card thickness into Material thickness.
Using them on the tree
For a hanging ornament, set the height low, 20 to 30 mm, and make the star 80 to 100 mm across. Punch a hole near one point of the lid before you fold, and thread ribbon through. Gold, silver or red card needs no decoration at all.
Mistakes to avoid
- Folding the notches the same way as the points. The wall then bulges out instead of forming the star.
- Very sharp stars in thick card. The fold at a thin point has little card to grip; for card above 300 gsm, raise the Point sharpness number, which makes the points blunter.
- A lid that sticks on the points. Raise the lid clearance to 1 mm; the star has many corners to catch.
Printing it
At its standard size the star box prints on 3 sheets of A4 or US Letter, each piece whole on its sheet, so there is nothing to tape. Whatever the size, print at 100% (“actual size”), never “fit to page”. Printing it right · Cricut and Silhouette · Designing it in Canva · Your own picture on it
How to put it together
Drawn from the star box template itself; words in capitals are printed on it.
-
Cut the solid lines
Solid lines are cuts: inside shapes first.
-
Score every dashed line
Dashed lines are folds: score them first so the card does not crack.
-
Step by step
- Cut out the BASE, the BOX WALL, and the LID and LID WALL if you set a lid.
- Crease every fold on the wall before you start: the points of the star fold one way, the notches between them the other.
- Glue the wall into a loop round the BASE, the (glue) end tab inside, lining each fold up with a point or a notch.
- Fold the little tabs in, sit the BASE on them and glue each one down.
- Make the lid the same way.
No glue needed.
Tip for this one: The wall has a fold line at every point of the star — crease them all before you start. Points fold one way, the notches between them fold the other.
Questions about the star box
How do I change how spiky the star is?
The point sharpness setting is how far in the notches cut between the points. Lower numbers give long thin spikes, higher numbers give a fat, chunky star.
Which way do the wall folds go?
They alternate. The folds at the tips of the star fold one way and the folds at the notches between them fold the other. Crease every line before you assemble anything.
Why is the wall one long strip instead of separate walls?
A single strip has one glued seam instead of one per point. On a ten-edged star that is the difference between one join and ten.
What size star box do I need for favour star, christmas star box or six-point gift star?
Favour star: Number of points 5 · diameter across points 100 mm · height of the box 30 mm; Christmas star box: Number of points 5 · diameter across points 150 mm · height of the box 35 mm; Six-point gift star: Number of points 6 · diameter across points 220 mm · height of the box 60 mm. These are starting sizes; measure what goes inside and add a few millimetres of room.
Templates like this one
In these collections: Christmas box templates
Guides: Christmas paper crafts: gift boxes, stars and decorations to print and fold
See all 174 templates · For Canva · For Cricut · For Etsy sellers · Getting it printed
Collections: Wedding and party favour box templates · Christmas box templates · Food box templates · Diwali mithai box templates

