No sign-up, no watermark on your box
Nothing uploaded — it runs in your browser
Free for personal use
PDF · SVG · DXF · PNG 300 dpi
BoxTemplate

Pocketfold Invitation Template

The wedding invitation folder: a panel for the invitation card and a pocket for the RSVP and details cards, as a bifold or a trifold with a flap, sized from your card. Weddings, engagements and events.

Pocketfold invitation — change shape

Size mm
Only here Your own design

Put a logo, photo or pattern straight onto the box — most free template sites give you the outline and stop there. Drag it where you want it; it is trimmed to the cut lines so nothing prints off the card, and it stays in your browser.

Advanced settingsunits, flaps, board, paper, lines
Units
Shape settings
Page

Bigger than the paper? Each piece prints whole on its own sheet. A single piece is never split: pick bigger paper or a smaller size. More about printing

Template

cutfold

Drop a picture anywhere on the drawingTap “Add a picture” below to print your own design on this box.

Print at 100% (“actual size”), never “fit to page”, or the box comes out the wrong size.

The pocketfold invitation template, flat and folded

Pocketfold invitation template — free printable dieline with cut and fold lines, any size
The printable dieline at its standard size. Type your own size above for yours.
Pocketfold invitation folded up from the template — the finished piece
The finished pocketfold invitation, made from it.

What this template is for

The wedding invitation folder: a panel for the invitation card and a pocket for the RSVP and details cards, as a bifold or a trifold with a flap, sized from your card. Weddings, engagements and events.

Also called pocketfold invitation · pocket fold wedding invitation · trifold pocket invitation · invitation pocket — all the same shape, and this is it.

How to use this template

All four downloads are the same pocketfold invitation at the same size — only the format changes.

Which file goes where: PDF, PNG, SVG or DXF
PDF printing at home
Print at 100 per cent, or hand it to a print shop as "actual size, no scaling".
PNG 300 dpi Canva, Photoshop, Procreate
Upload, lock it in place and design your pocketfold invitation on top. Free plan and phone included. Full Canva walkthrough →
SVG Cricut, Illustrator, Inkscape, Affinity
Vector, with cuts, folds and labels on separate layers. Cricut and Silhouette walkthrough →
DXF Silhouette, laser and vinyl cutters
Two layers, CUT and FOLD — and the one free Silhouette Studio Basic will open.

Getting it printed properly → · Putting your own design on it →

Printing it

  1. Type your size above, then download the PDF.
  2. Print at 100% — never “fit to page”, or every measurement comes out wrong.
  3. Too big for the paper? Pick your paper size and leave Fit the pieces to the page ticked: each piece gets its own place on a sheet and the PDF comes out with every page in it, nothing cut in half and nothing to tape.

How to put it together

These pictures are the pocketfold invitation itself, not a generic diagram — change the measurements above and the template changes, but the steps never do. The names in capitals are the labels printed on the template.

  1. Cut the solid lines

    Every solid line is a cut. Do the inside shapes first, while the sheet is still whole and easy to hold.

  2. Score every dashed line

    Dashed lines are folds. Score each one first — an empty ballpoint against a ruler — or the card cracks along the outside of the bend.

  3. INVITATIONPOCKET SIDEPOCKET

    Step by step

    1. Cut the outline and the thumb notch, and crease every dashed line.
    2. Fold the POCKET up onto the inside of the POCKET SIDE panel.
    3. Fold its two end tabs back behind it and glue them to the panel.
    4. Glue the invitation card on the INVITATION panel and slip the reply and detail cards in the pocket.
    5. Fold it shut: a trifold folds the FLAP over the invitation first, then the pocket panel over both.

Glue: a glue stick for paper, white PVA on card — hold each seam thirty seconds, and let it dry before you use it.

Questions about the pocketfold invitation

What size do I need?

Type the size of the invitation card. Each panel is that card plus a 3 mm margin all round, so the default 4 × 6 inch card (102 × 152 mm) makes 108 × 158 mm panels, and the flat sheet is 226 × 198 mm: it prints on A4 or US Letter. A 5 × 7 inch trifold is 407 × 224 mm and needs A3, tabloid or 12 × 12 inch card.

Bifold or trifold?

A bifold (2 panels) opens like a book: the invitation on the left, the pocket on the right. A trifold (3 panels) adds a FLAP on the left that folds over the invitation; it is drawn 2 mm narrower than a panel so it closes inside the edges, and the panel it closes over has 2 mm of room in the fold for the cards.

How deep is the pocket?

The default pocket is 40 mm deep, enough to hold RSVP and detail cards upright with their tops showing. It can be up to six tenths of the panel; deeper than that it hides the invitation. The thumb notch in its top edge lets the cards slide out.

Templates like this one

See all 164 templates · For Canva · For Cricut · For Etsy sellers · Getting it printed

Collections: Wedding and party favour box templates · Christmas box templates · Food box templates · Diwali mithai box templates