Oval Box Template
An oval or elliptical box with a lift-off lid. Soap boxes, hat boxes, trinket and jewellery boxes — set both widths the same for a circle.
Oval box — change shape
Put a logo, photo or pattern straight onto the box — most free template sites give you the outline and stop there. Drag it where you want it; it is trimmed to the cut lines so nothing prints off the card, and it stays in your browser.
Advanced settingsunits, flaps, board, paper, lines
Bigger than the paper? Each piece prints whole on its own sheet. A single piece is never split: pick bigger paper or a smaller size. More about printing
This shape has no 3D view yet. The template is still exact.
This shape's 3D view is only an approximation of the printed sheet, so it shows plain card. Your pictures still print exactly where you placed them on the template.
Drag to turn and tilt it; ctrl + scroll or the + and − buttons zoom.Swipe sideways to turn it. Two fingers tilt and pinch to zoom; full screen lets one finger do everything. Double-tap to reset. The fold starts from the very template you print, so gaps and loose tabs show.
Drop a picture anywhere on the drawingTap “Add a picture” below to print your own design on this box.
Print at 100% (“actual size”), never “fit to page”, or the box comes out the wrong size.
The oval box template, flat and folded


What this template is for
An oval or elliptical box with a lift-off lid. Soap boxes, hat boxes, trinket and jewellery boxes — set both widths the same for a circle.
Also called elliptical box · oval gift box · soap box with lid
What size oval box do I need?
The same oval box does a different job at each size. These are starting sizes for the things people make it for most. Tap one to open the template at that size, then measure your own and change any number to fit.
| Use | Size (Width × Depth front to back × Height of the box) | Holds |
|---|---|---|
| Oval soap | 100 × 70 × 35 mm | An oval soap or bath bomb |
| Jewellery | 140 × 95 × 50 mm | Rings, earrings and a bracelet |
| Shaker-style keepsake box | 200 × 140 × 80 mm | Letters, photos or sewing things |
The oval box at a glance
| Standard size | Width × Depth front to back × Height of the box: 140 × 95 × 50 mm (5.5 × 3.7 × 2 in) |
|---|---|
| Flat sheet at that size | 396 × 322 mm (15.6 × 12.7 in) |
| Prints on | A4: 3 sheets, each piece whole · US Letter: 3 sheets, each piece whole · A3: 2 sheets, each piece whole |
| Biggest on one sheet of A4 | 66 × 45 × 23 mm (2.6 × 1.8 × 0.9 in) |
| Biggest on one sheet of US Letter | 69 × 46 × 24 mm (2.7 × 1.8 × 0.9 in) |
| Glue | Yes |
| Drawn for | Heavy cardstock, 350–450 gsm / cereal-box card (0.5 mm) |
Making an oval box with a lid that fits
How the box goes together
An oval box is four parts: a base, a long wall strip that wraps round it with small tabs along one edge, and a lid top with its own shorter wall strip. The strip is cut to the distance round the oval, not its width, with a little added for the card thickness so the finished box is the size you typed.
Which card
Thin card between 200 and 300 gsm curves smoothly. Thicker card tends to go round in flat facets unless you pre-curl it: roll the strip round a bottle, a rolling pin or a tin before gluing, and it takes the bend. Type the card thickness into Material thickness.
Getting the lid right
The lid is the base made bigger all round by the card thickness plus the lid clearance. About half a millimetre gives a snug lid that stays on when the box is picked up by it; one millimetre lifts off easily. Textured or very thick card needs the larger figure. A deep lid, a third to half the box height, makes a hat box; a shallow one looks like a soap or trinket box.
Sizes people make it in
- Soap box: about 95 × 65 mm and 35 mm high for a standard oval bar.
- Trinket or ring box: 60 to 80 mm wide.
- Hat box for gifts or storage: 200 to 300 mm wide. A wall strip longer than the paper is printed in numbered sections that glue end to end.
- Round box: set the depth the same as the width.
Mistakes to avoid
- Gluing the strip into a loop first and then forcing the base in. Glue the strip round the base, tab by tab, so it follows the curve.
- Very narrow, very long ovals. The tighter the ends, the harder the card has to bend there; as a rule of thumb, keep the depth at least half the width for card above 250 gsm.
Printing it
At its standard size the oval box prints on 3 sheets of A4 or US Letter, each piece whole on its sheet, so there is nothing to tape. Whatever the size, print at 100% (“actual size”), never “fit to page”. Printing it right · Cricut and Silhouette · Designing it in Canva · Your own picture on it
How to put it together
Drawn from the oval box template itself; words in capitals are printed on it.
-
Cut the solid lines
Solid lines are cuts: inside shapes first.
-
Score every dashed line
Dashed lines are folds: score them first so the card does not crack.
-
Step by step
- Cut out the BASE, the BOX WALL, and the LID and LID WALL if you set a lid.
- Curl the wall strip round a bottle or tin so it takes the bend. Do not score the wall itself.
- Glue it into a loop round the BASE, the (glue) end tab inside.
- Fold the little tabs in, sit the BASE on them and glue each one down.
- Make the lid the same way.
Glue: glue stick on paper, PVA on card.
Tip for this one: Curl the wall strip round a bottle or tin first so it takes the bend, then glue it into a loop round the base and fix the tabs down.
Questions about the oval box
How do I make a perfectly round box?
Set the width and the depth to the same number and the oval becomes a circle.
Why is the wall strip longer than the width of the oval?
It has to reach all the way round the edge, so its length is the perimeter, not the width. The generator also adds a little for the thickness of your board so the finished box is the size you asked for.
Will the lid be loose or tight?
That is the lid clearance setting. Half a millimetre is snug, a full millimetre slides easily. Increase it for thick or textured card.
What size oval box do I need for oval soap, jewellery or shaker-style keepsake box?
Oval soap: 100 × 70 × 35 mm; Jewellery: 140 × 95 × 50 mm; Shaker-style keepsake box: 200 × 140 × 80 mm. These are starting sizes; measure what goes inside and add a few millimetres of room.
Templates like this one
See all 174 templates · For Canva · For Cricut · For Etsy sellers · Getting it printed
Collections: Wedding and party favour box templates · Christmas box templates · Food box templates · Diwali mithai box templates