BoxTemplate

Hang Tab Box Template

A retail tuck box that hangs on a shop peg: the back carries on above the box as a double header with a euro slot through it. The lid tucks in under the header. Cosmetics, earrings, small electronics, accessories and craft-fair stock.

Hang tab box — change shape

Size mm
Only here Your own design

Put a logo, photo or pattern straight onto the box — most free template sites give you the outline and stop there. Drag it where you want it; it is trimmed to the cut lines so nothing prints off the card, and it stays in your browser.

Advanced settingsunits, flaps, board, paper, lines
Units
Shape settings
Page

Bigger than the paper? Each piece prints whole on its own sheet. A single piece is never split: pick bigger paper or a smaller size. More about printing

Template

cutfold

Drop a picture anywhere on the drawingTap “Add a picture” below to print your own design on this box.

Print at 100% (“actual size”), never “fit to page”, or the box comes out the wrong size.

The hang tab box template, flat and folded

Hang tab box template — free printable dieline with cut and fold lines, any size
The printable dieline at its standard size. Type your own size above for yours.
Hang tab box folded up from the template — the finished box
The box it folds into.

What this template is for

A retail tuck box that hangs on a shop peg: the back carries on above the box as a double header with a euro slot through it. The lid tucks in under the header. Cosmetics, earrings, small electronics, accessories and craft-fair stock.

Also called euro slot box · hanging box · peg hook box · retail hang box — all the same shape, and this is it.

How to use this template

All four downloads are the same hang tab box at the same size — only the format changes.

PDF printing at home
Print at 100 per cent, or hand it to a print shop as "actual size, no scaling".
PNG 300 dpi Canva, Photoshop, Procreate
Upload, lock it in place and design your hang tab box on top. Free plan and phone included. Full Canva walkthrough →
SVG Cricut, Illustrator, Inkscape, Affinity
Vector, with cuts, folds and labels on separate layers. Cricut and Silhouette walkthrough →
DXF Silhouette, laser and vinyl cutters
Two layers, CUT and FOLD — and the one free Silhouette Studio Basic will open.

Getting it printed properly →

Printing it

  1. Type your size above, then download the PDF.
  2. Print at 100% — never “fit to page”, or every measurement comes out wrong.
  3. Too big for the paper? Pick your paper size and leave Fit the pieces to the page ticked: each piece gets its own place on a sheet and the PDF comes out with every page in it, nothing cut in half and nothing to tape.

How to put it together

These pictures are the hang tab box itself, not a generic diagram — change the measurements above and the template changes, but the three steps never do.

  1. Cut the solid lines

    Every solid line is a cut. Do the inside shapes first, while the sheet is still whole and easy to hold.

  2. Score every dashed line

    Dashed lines are folds. Score each one first — an empty ballpoint against a ruler — or the card cracks along the outside of the bend.

  3. (glue)FRONTSIDEBACKSIDELIDBOTTOMHEADER(glue behind)

    Fold, glue and hold

    Score every dashed line. Glue the side seam to make a tube. Fold the HEADER's second layer down behind the first along its dashed line and glue them together, so the two euro slots line up. Tuck the bottom shut. Fill the box, fold the dust flaps in and close the LID from the front, tucking it in behind the back wall under the header.

Glue: a glue stick for paper, white PVA on card — hold each seam thirty seconds, and let the box dry standing up.

Questions about the hang tab box

What is a euro slot?
The hanging hole on retail packs: a slot with a round hole in its middle, so it fits both flat and round shop pegs. It is cut through both layers of the header, in the same place, so they line up when glued.
Why is the header double?
One layer of card tears at the hole under the weight of the product. Folded down and glued behind itself, the header is twice as strong and printed on both sides.
Will it print on one sheet?
Yes. At the size it opens with — 60 × 25 × 90 mm with a 35 mm header — it fits one A4 or US Letter sheet.

Print your own design on it

Add a logo, photo or pattern in the panel on the left and drag it onto the hang tab box. It is trimmed to the cut outline, embedded properly in the PDF, and never leaves your computer — most free template sites hand you the outline and stop there. How printing your own design works.

Templates like this one

See all 115 templates · For Canva · For Cricut · For Etsy sellers · Getting it printed

Collections: Wedding and party favour box templates · Christmas box templates · Food box templates